The Bushranger Night Hawk VCT Series Wiring System has been pushed to the edge by developing the first dedicated auxiliary light wiring system; incorporating relay free switching and brightness control functionality.

What does this mean? Simpler wiring, easier installation, more user control and greater reliability over the traditional plug and play wiring loom.

The commonly used automotive 12V relay is removed entirely and replaced with modern transistor switching, which is built into the light and the control module.

Each light is powered directly from the battery, rather than through a relay, meaning there are no power restrictions for the wiring system, which is a common limitation with traditional relay-based wiring looms. Up to 4 x Bushranger Night Hawk VCT Series LED lights can be controlled by 1 wiring system and any combination of models/sizes can be used.

Plug & Play Connectors

The wiring system uses control leads with waterproof plugs which quickly and easily join together to allow plenty of flexibility when routing from the control module to the VLI lights.

Soft Start Programming

The soft start feature programmed into the control module gradually increases the light intensity over the first second of operation to reduce eye strain and flash blindness that commonly occurs when switching into high beam mode with high intensity LED lights fitted. It also extends the life of the electronics by reducing the sudden shock load that occurs when high output LED’s change instantly from off to on.

Specifications

• Voltage Range: 10 – 30V DC
• Controller: Backlit with two rotary control dials and mounting cradle
• Light Intensity Control: 8 x brightness settings (0% – 100%)
• Colour Temperature Control: 8 x Colour Temperature settings (3000K to 6000K)
• Light Capacity (as supplied): Connect and control 2x VCT Series lights simultaneously
• Light Capacity (MAX): Connect and control up to 4 x VCT Series lights simultaneously (additional lights & control leads sold separately)