The Bar Clamps come with two sets of rubber inserts, which are 1.2mm and 4.4mm in thickness. These rubber inserts allow you to select the correct thickness for your application, depending on the bar diameter.

How to Fit

1. Split the Bar Clamps at the hinged joint by sliding the brackets apart
2. Place the two halves of the separated bar clamp over your bull or nudge bar and re-join the hinge by sliding them together
3. Insert the required thickness rubber insert between the mount and the bar
4. With the Lightforce Bar Clamp located over your bar, use the hardware supplied with your Lightforce Driving Light to mount the Light and to secure the Bar Clamp in the closed position
5. Tighten your mounting hardware to the specifications supplied with your Lightforce Driving Light.