This endcap was designed to provide maximum security with our built in Masterkey compatible steel locks. The cover plate includes high quality internal seals to keep your contents dry and protected using high impact materials.

Apart from the simple twist and lift operation to open the end cap, the internal sleeve sits flush with the conduit pipe to minimise the chance of your contents from catching the lip at the join.

The conduit can be fitted to the Rhino-Rack Heavy Duty Bars using the Rhino-Rack Rack conduit clamps RPC4, BC2, BC3, BC4. The P30-100 will also fit Vortex Bars using the Conduit Clamp SPC4.

Features:

• Integrated lock, Masterkey compatible
• O-Ring seal reduces dust and water build up inside the conduit pipe
• Locking end cap sits flush with conduit pipe so there is no interference with your conduit load
• Simple twist and lift operation
• Lid remains open even when your vehicle is parked on an incline
• Double wall internal pivot plate
• Dynamic testing to AS1235:2000
• Crash tested to ISO11154:2006
• Conduit size 3m /100mm (10ft/4inches)
• Recommended maximum carrying capacity is 15kg / 33lb
• Designed and Made in Australia
• 5 Year Warranty
• MasterKey compatible
• End Caps Supplied on both ends of conduit

Before you order

Please check our terms and conditions statement.

Key Load Rating Points: 

• Always check your vehicle manufacturer's recommended roof load rating
• You must include the roof rack's weight in your load calculation 
• Carrying capacity will be reduced off-road.
• If in doubt, contact us or the Roof Rack Manufacturer.  

For a more in-depth explanation of Load Ratings and how to calculate payload, follow this link to our article.

Images on our Listings

We aim to ensure all images displayed on our listings are accurate however, images are for illustration purposes only and are to be used as a guide only.

Returns & Refunds

We accept returns. Please contact our customer service immediately if;

• Your item arrives damaged or malfunctioning
• You change your mind and wish to request a return
• You have ordered the wrong products for your vehicle
• You want to make a warranty claim for an item you have purchased from us. 
• You are not satisfied with a product you have purchased from us. 

We reserve the right to refuse a return for change-of-mind returns or for situations where you have ordered the wrong product. 

You must comply with all instructions provided to you by our customer service team.

If you suspect you have been sent a wrong or damaged item do not attempt to fit. Contact us

Warranty

All of the products we sell come with manufacturer's warranties which protect you against manufacturing faults and defects. 

The warranty varies from manufacturer to manufacturer so if you feel you have a warranty claim, please contact us.

As we are an Australian retailer we are governed by Australian Consumer Law. You can read about your rights as a consumer under Australian Consumer Law by visiting the ACCC website.

We value our customers and want to make your purchasing process as enjoyable as possible. Should you have any concerns with your product, please contact us and we will address them.