The Pioneer Leg Height Spacers are used to level a Pioneer system on a vehicle. Attached between either a Rhino-Rack RLCP or RL leg and a Pioneer Platform or Tray, these set of spacers will raise the Pioneer to allow the legs to slide out wider, approximately by 75mm overall. This allows each of the Pioneers to fit a wider ranger of vehicles, with the option of choosing a narrower tray/platform rather than a larger one.

All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is a maximum of 3 x spacers. Only 1 x PLHSPAIR is necessary, if extra height is required 2 x LHSPAIR spacers can be used with the PLHSPAIR.

2x 10mm spacer blocks are included.

Please note: These spacers are not suitable for roof rack crossbars.

Features:

  • Used to level a Pioneer system on your vehicle
  • Attached with Rhino-Rack RLCP or RL legs
  • Allows the Pioneer Trays and Platforms to fit more vehicles
  • 2x 10mm spacer blocks are included

All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is a maximum of 3 x spacers. Only 1 x PLHSPAIR is necessary, if extra height is required 2 x LHSPAIR spacers can be used with the PLHSPAIR.

2x 10mm spacer blocks are included.

Please note: These spacers are not suitable for roof rack crossbars.

Features:

  • Used to level a Pioneer system on your vehicle
  • Attached with Rhino-Rack RLCP or RL legs
  • Allows the Pioneer Trays and Platforms to fit more vehicles
  • 2x 10mm spacer blocks are included
SKU PLHSPAIR
Model # PLHSPAIR
Barcode # 9321911059255
Brand Rhino-Rack
Shipping Weight 0.2000kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.190m

Before you order

Please check our terms and conditions statement.

Key Load Rating Points: 

  • Always check your vehicle manufacturer's recommended roof load rating
  • You must include the roof rack's weight in your load calculation 
  • Carrying capacity will be reduced off-road.
  • If in doubt, contact us or the Roof Rack Manufacturer.  

For a more in-depth explanation of Load Ratings and how to calculate payload, follow this link to our article.

Images on our Listings

We aim to ensure all images displayed on our listings are accurate however, images are for illustration purposes only and are to be used as a guide only.

Returns & Refunds

We accept returns. Please contact our customer service immediately if;

  • Your item arrives damaged or malfunctioning
  • You change your mind and wish to request a return
  • You have ordered the wrong products for your vehicle
  • You want to make a warranty claim for an item you have purchased from us. 
  • You are not satisfied with a product you have purchased from us. 

We reserve the right to refuse a return for change-of-mind returns or for situations where you have ordered the wrong product. 

You must comply with all instructions provided to you by our customer service team.

If you suspect you have been sent a wrong or damaged item do not attempt to fit. Contact us

Warranty

All of the products we sell come with manufacturer's warranties which protect you against manufacturing faults and defects. 

The warranty varies from manufacturer to manufacturer so if you feel you have a warranty claim, please contact us.

As we are an Australian retailer we are governed by Australian Consumer Law. You can read about your rights as a consumer under Australian Consumer Law by visiting the ACCC website.

We value our customers and want to make your purchasing process as enjoyable as possible. Should you have any concerns with your product, please contact us and we will address them.

Be The First To Review This Product!

Help other Drivetrade users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category