The RLKS1 spacer blocks are used to level a 3 bar roof rack system on a vehicle such as a ute or pick up that may have rear ute posts or a canopy rack system. Attached between the Rhino-Rack 2500 leg and either a Rhino-Rack Heavy Duty or Vortex cross bar, this set of spacers will raise the cross bar 10mm in height.

These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like our legs, they are strong and flexible.

All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the JB Spacer / Height Adjustor (RLK2500HALF-JB).

This kit includes:

  • 2 x 10mm Spacer Blocks
  • 2 x M6 x 32mm Bolts

These leg height spacers have been designed for use on a support bar, set up for long loads - they are not to be used as a 2 bar system under a load bearing cross bar. Made from glass re-enforced nylon, just like our legs, they are strong and flexible.

All necessary hardware is supplied. The maximum height stacking that is recommended by Rhino-Rack Rack is 42mm. If you need to go higher, please use the JB Spacer / Height Adjustor (RLK2500HALF-JB).

This kit includes:

  • 2 x 10mm Spacer Blocks
  • 2 x M6 x 32mm Bolts
SKU RLKS1
Model # RLKS1
Barcode # 9321911020842
Brand Rhino-Rack
Shipping Weight 0.3700kg
Shipping Width 0.100m
Shipping Height 0.050m
Shipping Length 0.190m

Before you order

Please check our terms and conditions statement.

Key Load Rating Points: 

  • Always check your vehicle manufacturer's recommended roof load rating
  • You must include the roof rack's weight in your load calculation 
  • Carrying capacity will be reduced off-road.
  • If in doubt, contact us or the Roof Rack Manufacturer.  

For a more in-depth explanation of Load Ratings and how to calculate payload, follow this link to our article.

Images on our Listings

We aim to ensure all images displayed on our listings are accurate however, images are for illustration purposes only and are to be used as a guide only.

Returns & Refunds

We accept returns. Please contact our customer service immediately if;

  • Your item arrives damaged or malfunctioning
  • You change your mind and wish to request a return
  • You have ordered the wrong products for your vehicle
  • You want to make a warranty claim for an item you have purchased from us. 
  • You are not satisfied with a product you have purchased from us. 

We reserve the right to refuse a return for change-of-mind returns or for situations where you have ordered the wrong product. 

You must comply with all instructions provided to you by our customer service team.

If you suspect you have been sent a wrong or damaged item do not attempt to fit. Contact us

Warranty

All of the products we sell come with manufacturer's warranties which protect you against manufacturing faults and defects. 

The warranty varies from manufacturer to manufacturer so if you feel you have a warranty claim, please contact us.

As we are an Australian retailer we are governed by Australian Consumer Law. You can read about your rights as a consumer under Australian Consumer Law by visiting the ACCC website.

We value our customers and want to make your purchasing process as enjoyable as possible. Should you have any concerns with your product, please contact us and we will address them.

Be The First To Review This Product!

Help other Drivetrade users shop smarter by writing reviews for products you have purchased.

Write a product review